What are the benefits of using frequency converter for companies building product testing workstations?

Now there are many instrumentation manufacturers, often some manufacturers in the product testing, ignoring the establishment of a product tester workstation.

Perhaps some people simply do not take it as a matter of fact, the establishment of product testing workstations used to frequency converter for the enterprise what are the benefits? If the place to test the product and the production plant together.

Then this will be easy to cause insecurity, because in the process of production items are placed in a mess, so in order to be safe it is necessary to establish a product safety testing workstations, the importance of which is to protect the safety of people, the establishment of a product testing workstations.

In its above written danger non-staff do not approach, so you can avoid some dangerous accidents, so that the product testing will also be very smooth, but also to enhance the efficiency of the work.

Stacked too much debris also need to be dealt with, the establishment of a product testing workstation can be very convenient for testing.

When setting up an electrical safety test (safety test) station that performs compliance with UL, CSA, EN, or other organization’s rules and specifications, it is important to consider the safety of the operator doing the test and the safety of the user of the product being tested as equally important.

The first issue facing manufacturers is where to obtain guidelines for setting up a mission station. It is not uncommon for the person setting up the task station to lack basic knowledge of electricity and its risks.

This lack of awareness of the potential risks makes it difficult to put in place the necessary safety devices to protect the operator against the risk of electric shock.

Attention is often focused only on how to set up the test area in order to maximize consumption capacity.

As assembly operations can also be carried out simultaneously at the same station to balance the production line, it is particularly important to have a safe station.

As assemblers who do not deal with electricity during the production process may accidentally come into contact with electrical equipment and be exposed to electrical risks.

Qualified operators should have the necessary skills and techniques to be able to distinguish between exposed live parts and other parts of electrical equipment with various risks.

Operators may come into contact with exposed energized parts during the testing process, and these parts are integral parts of the product.

1. The test station should be separate from the mission area. The structure of walls and fences should be able to maintain the safety of personnel standing outside the test area.

The fence should be constructed in such a way as to enable the test operator and the personnel outside the test area to stop eye contact.

2. It is necessary to prevent other people from privately using or intentionally operating the test equipment. In the design should be added to the locking mechanism.

3. Emergency switching device. This provides the operator with a way to quickly cut off all the voltage that will incur risk. At least one such device should be installed outside the test area.

4. Test the material of the task force should be selected non-conductive material. In the stop test, the requirements of the object under test (DUT) is isolated from the ground.

5. Two-handed operation control. Assuming that the design of the task station can not device insulated blocking device, two-handed operation of the control device can be used as an alternative.

6. Double safety probe. The operator can be manually operated by the voltage to the probe or release the charged probe, but if the probe is still charged, the operator should at least be insulated from the experimental voltage.

Some probes may contain an automatic switching circuit that suppresses the high voltage when the probe is released.

Dual safety probes are specifically designed for installations that require the operator to use both hands to test the DUT. This prevents the operator from coming into contact with the DUT while testing is in progress.

Summarize: the establishment of a product testing workstation can improve our work efficiency, but also to ensure the personal safety of the staff, the enterprise should be to establish a product testing workstation.